If you need 3D step-file of your reference contact us and you will receive it within one working day.
机械规格 | |
---|---|
材料 | 端盖: 铝 外壳: 铝 轴: 不锈钢 |
轴承 | 滚珠 |
轴承寿命 | 1×1010 圈 |
机械允许最大转速 | 6000 rpm – 标准 10000 rpm – 根据要求 12000 rpm (≤ 12 位) – 根据要求 |
防尘和防水等级符合 DIN EN 60529 | IP64 |
转子转动惯量 | 2 gcm2 |
20°C (68°F) 时的启动扭矩 | ≤ 0.01 Nm |
轴向允许最大负载 | 20 N |
径向允许最大负载 | 40 N |
重量 | 约0.08 Kg |
工作温度范围 | 40°C 至 +105°C |
振动根据 DIN EN 60068-2-6 | 100 m/s2 (10Hz…2000Hz) |
冲击根据 DIN EN 60068-2-27 | 1000 m/s2 (6ms) |
轴向或径向连接 | 2 米线缆 (其他线缆长度可订购) |
ELECTRICAL SPECIFICATIONS | |
---|---|
Interface | BISS |
Electronic output | RS422 |
Power supply (VCC) | 4,75…30 VDC |
Consumption | ≤ 100 mA |
Code | Binary |
Protocol | BISS |
Singleturn resolution | up to 13 bits |
Absolute accuracy | ±0,35° |
Relative accuracy | ±1,5 LSB |
Max. load capability / channel | ±20 mA |
“Low” signal level | < 0,8 VDC |
“High” signal level | 2 … 5,5 VDC |
Frequency | 50 kHz…10 MHz |
Short circuit protection | Yes |
Protection polarity inversion | Yes |