Hohner SERIE 10 encoder is compatible with all reference options of SERIE H:
H-3XXXX |
H-6XXXX |
H-4XXXX |
H-1XXXX |
H-11XXX |
||||
|---|---|---|---|---|---|---|---|---|
| H31200 H31230 H31N9U H33240 H3334A H33390 H33391 H33530 H3354A H33550 H33630 H3363W |
H3365W H3365Z H3367Z H3368W H339BA H33C31 H33N40 H33P3U H33P50 H33P5W H3624A H36P3W |
H61K5W H61P5A H63331 H66220 H66230 H6623U H66240 H6624A H6624Y H6626A H66301 |
H6634A H6634U H6634Y H663C0 H663C1 H66540 H6663Z H666B0 H66G30 H66KCZ |
H45300 H46140 H4624A H4634A H46B4A |
H12230 H13PCU H16200 H16210 H16220 H16230 H1624A H16260 H16290 H1634A H1663W H1665W H1665Z H1667A H1667Z |
H166CZ H1684A H16930 H16990 H1699Z H16B40 H16K7Z H16M30 H16N30 H16P5A H1M220 H1M34A H1M3BX H1MG30 |
H11200 H11210 H11230 H11240 H11250 H11320 H11331 H11340 H11360 H11361 H11391 H11621 H1163W H1165W H1165Z |
H1168A H116EA H116XA H11840 H11921 H11K32 H11K3Z H11K5A H11K7A H11N70 H11N90 H11P3U H11P50 H11P5A H11P5U |
Contact us for your complete reference.
SERIE 10 – HIGH RESOLUTION INCREMENTAL ENCODER
- Resolution up to 50.000 PPR
- External diameter Ø 58 mm
- Shaft Ø from 6 to 12 mm
- Protection class IP67 according to DIN EN 60529
- Highly flexible flanges and different configurations
- Executions mechanical, electronic and special optics forms available on request
- Connection by cable (any cable lenght available) or industrial connector
- Female connector included
Options available on Hohner reference SERIE H:
Contact us about your complete reference, and we offer the corresponding code of Hohner Automation.
3 = Ø 6mm
6 = Ø 8mm
6 = Ø 8mm
4 = Ø 9.52mm
1 = Ø 10mm
1 = Ø 10mm
On request:
2 = Ø 12mm
2 = Ø 12mm
1 = Ø58,00mm round flange with 3xM3mm holes
2 = Ø70,00mm round flange with 3xM4mm holes
3 = Ø58,00mm round flange with 3xM4mm holes
2 = Ø70,00mm round flange with 3xM4mm holes
3 = Ø58,00mm round flange with 3xM4mm holes
4 = Ø58,00mm round flange with 4xM5mm holes
5 = Ø58,00mm round flange with 3xM3mm holes
6 = Ø63,5mm square flange with 4×5,5mm holes
5 = Ø58,00mm round flange with 3xM3mm holes
6 = Ø63,5mm square flange with 4×5,5mm holes
7 = Ø80,00mm square flange with 4×5,5mm holes
9 = Ø63,5mm square flange with 4×4,5mm holes
M = Ø63,5mm round flange with 3xM5mm holes
9 = Ø63,5mm square flange with 4×4,5mm holes
M = Ø63,5mm round flange with 3xM5mm holes
2 = AB – PP11/28V
3 = AB, Z\ – PP11/28V
N = AB, AB\ – PP11/28V
P = ABZ, ABZ\ – PP11/28V
B = AB – OC11/28V
C = AB, Z\ – OC11/28V
3 = AB, Z\ – PP11/28V
N = AB, AB\ – PP11/28V
P = ABZ, ABZ\ – PP11/28V
B = AB – OC11/28V
C = AB, Z\ – OC11/28V
G = AB – NPN 11/28V
H = AB, Z\ – NPN 11/28V
5 = AB, AB\ – LD5V
6 = ABZ, ABZ\ – LD5V
8 = AB, AB\ – LD5/12V
9 = ABZ, ABZ\ – LD5/12V
H = AB, Z\ – NPN 11/28V
5 = AB, AB\ – LD5V
6 = ABZ, ABZ\ – LD5V
8 = AB, AB\ – LD5/12V
9 = ABZ, ABZ\ – LD5/12V
S = AB, AB\ – LD15/24V (out 12V)
T = ABZ, ABZ\ – LD15/24V (out 12V)
K = ABZ, ABZ\ – LD15/24V (out 5V)
W = ABZ, ABZ\ – SinCos 1Vpp
T = ABZ, ABZ\ – LD15/24V (out 12V)
K = ABZ, ABZ\ – LD15/24V (out 5V)
W = ABZ, ABZ\ – SinCos 1Vpp
2 = 9414 Radial
0 = 9414 Axial
3 = Cable Radial
9 = Cable Axial
4 = 9418 Radial
0 = 9414 Axial
3 = Cable Radial
9 = Cable Axial
4 = 9418 Radial
6 = 9418 Axial
5 = 9416 Radial
E = 9416 Axial
7 = 9419 Radial
8 = 9419 Axial
5 = 9416 Radial
E = 9416 Axial
7 = 9419 Radial
8 = 9419 Axial
B = 9415 Radial
A = 9415 Axial
N = 9413 Axial
A = 9415 Axial
N = 9413 Axial
0 = None
1 = High zero pulse
Z = Synchronised zero Pulse to 180° only for LD
W = Synchronised zero Pulse to 90° only for LD
A = Special connections
1 = High zero pulse
Z = Synchronised zero Pulse to 180° only for LD
W = Synchronised zero Pulse to 90° only for LD
A = Special connections
Y = Power supply 5/12V for output NPN/OC/PP
U = Power supply 5/30V outputs PP
Sinusoidal ver.
S = 5 Volt
T = 8/24 Volt
U = Power supply 5/30V outputs PP
Sinusoidal ver.
S = 5 Volt
T = 8/24 Volt
Any number of pulses available up to 50.000 PPR
