SERIE H

Hohner SERIE 10 encoder is compatible with all reference options of SERIE H:

H-3XXXX		H-6XXXX		H-4XXXX	H-1XXXX		H-11XXX
H31200 H31230 H31N9U H33240 H3334A H33390 H33391 H33530 H3354A H33550 H33630 H3363W	H3365W H3365Z H3367Z H3368W H339BA H33C31 H33N40 H33P3U H33P50 H33P5W H3624A H36P3W	H61K5W H61P5A H63331 H66220 H66230 H6623U H66240 H6624A H6624Y H6626A H66301	H6634A H6634U H6634Y H663C0 H663C1 H66540 H6663Z H666B0 H66G30 H66KCZ	H45300 H46140 H4624A H4634A H46B4A	H12230 H13PCU H16200 H16210 H16220 H16230 H1624A H16260 H16290 H1634A H1663W H1665W H1665Z H1667A H1667Z	H166CZ H1684A H16930 H16990 H1699Z H16B40 H16K7Z H16M30 H16N30 H16P5A H1M220 H1M34A H1M3BX H1MG30	H11200 H11210 H11230 H11240 H11250 H11320 H11331 H11340 H11360 H11361 H11391 H11621 H1163W H1165W H1165Z	H1168A H116EA H116XA H11840 H11921 H11K32 H11K3Z H11K5A H11K7A H11N70 H11N90 H11P3U H11P50 H11P5A H11P5U

Contact us for your complete reference.

SERIE 10 – HIGH RESOLUTION INCREMENTAL ENCODER

Resolution up to 50.000 PPR
External diameter Ø 58 mm
Shaft Ø from 6 to 12 mm
Protection class IP67 according to DIN EN 60529
Highly flexible flanges and different configurations
Executions mechanical, electronic and special optics forms available on request
Connection by cable (any cable lenght available) or industrial connector
Female connector included

Options available on Hohner reference SERIE H:

Contact us about your complete reference, and we offer the corresponding code of Hohner Automation.

3 = Ø 6mm
6 = Ø 8mm

4 = Ø 9.52mm
1 = Ø 10mm

On request:
2 = Ø 12mm

1 = Ø58,00mm round flange with 3xM3mm holes
2 = Ø70,00mm round flange with 3xM4mm holes
3 = Ø58,00mm round flange with 3xM4mm holes

4 = Ø58,00mm round flange with 4xM5mm holes
5 = Ø58,00mm round flange with 3xM3mm holes
6 = Ø63,5mm square flange with 4×5,5mm holes

7 = Ø80,00mm square flange with 4×5,5mm holes
9 = Ø63,5mm square flange with 4×4,5mm holes
M = Ø63,5mm round flange with 3xM5mm holes

2 = AB – PP11/28V
3 = ABn0 – PP11/28V
N = AB+nAB – PP11/28V
P = AB0+nAB0 – PP11/28V
B = nAB – OC11/28V
C = ABn0 – OC11/28V

G = AB – NPN 11/28V
H = ABn0 – NPN 11/28V
5 = AB+nAB – LD5V
6 = AB0+nAB0 – LD5V
8 = AB+nAB – LD5/12V
9 = AB0+nAB0 – LD5/12V

S = AB+nAB – LD15/24V (out 12V)
T = AB0+nAB0 – LD15/24V (out 12V)
K = AB0+nAB0 – LD15/24V (out 5V)
W = AB0+nAB0 – SinCos 1Vpp

2 = 9414 Radial
0 = 9414 Axial
3 = Cable Radial
9 = Cable Axial
4 = 9418 Radial

6 = 9418 Axial
5 = 9416 Radial
E = 9416 Axial
7 = 9419 Radial
8 = 9419 Axial

B = 9415 Radial
A = 9415 Axial
N = 9413 Axial

0 = None
1 = High zero pulse
Z = Synchronised zero Pulse to 180° only for LD
W = Synchronised zero Pulse to 90° only for LD
A = Special connections

Y = Power supply 5/12V for output NPN/OC/PP
U = Power supply 5/30V outputs PP
Sinusoidal ver.
S = 5 Volt
T = 8/24 Volt

Any number of pulses available up to 50.000 PPR

CONTACT HOHNER

Available
24/48h Express Delivery

Ask for information

QUOTE REQUEST