MECHANICAL SPECIFICATIONS | |
---|---|
Materials | Cover: Aluminium Housing: Aluminium Shaft: Stainless Steel |
Bearings | Ballraces |
Bearings lifetime | 1×1010 rev. |
Housing fixing | Flexible flange |
Shaft fixing | Frontal setscrews |
Hollow shaft diameter | 4, 6, or 8 mm |
Maximum number of revolutions permitted mechanically | 6000 rpm |
Protection against dust and splashes according to DIN EN 60529 | IP54 |
Rotor inertia moment | 30 gcm² |
Starting torque at 20°C (68°F) | ≤ 0,02 Nm |
Maximum load permitted on axial shaft | 20 N |
Maximum load permitted on radial shaft | 40 N |
Weight aprox. | 0,5 Kg |
Operating temperature range | 40°C to +85°C — Standard |
Vibration according to DIN EN 60068-2-6 | 100 m/s² (10Hz…2000Hz) |
Shock according to DIN EN 60068-2-27 | 1000 m/s² (6ms) [ > 1.024 ppr ] |
Maximum pulses per turn | 32768 |
Radial connection | 2 meters cable (other cable lengths available or connector mounted at the end of the cable, upon request |
OUTPUT SIGNALS | ||||
---|---|---|---|---|
OUTPUT CIRCUIT | Push-Pull Differential | RS422 (TTL compatible) | RS422 (TTL compatible) | Push-Pull Differential |
Power supply | 11…30 VDC | 5 VDC ±5% | 11…30 VDC | 5…30 VDC |
Output voltage | 11…30 VDC | 5 VDC | 5 VDC | 5…30 VDC |
Consumption | Tipical: 45 mA Max: 150 mA |
Tipical: 70 mA Max: 150 mA |
Tipical: 80 mA Max: 160 mA |
Tipical: 70 mA Max: 150 mA |
Max. load capability / channel | ±30 mA | ±20 mA | ±20 mA | ±30 mA |
“Low” signal level | VOL < 2.5 VDC | VOL < 0.5 VDC | VOL < 0.5 VDC | VOL < 2.5 VDC |
“High” signal level | VOH > VCC – 3 VDC | VOH > 2.5 VDC | VOH > 2.5 VDC | VOH > VCC – 3 VDC |
Frequency | 300 kHz | 300 kHz | 300 kHz | 300 kHz |
Short circuit protection | Yes | Yes | Yes | Yes |
Protection polarity inversion | Yes | Yes | Yes | Yes |
Channel B leads (90° electric) channel A, view from the shaft, shaft rotating clockwise |