ИНКРЕМЕНТАЛЬНЫЙ ЭНКОДЕР С ПОЛЫМ ТУПИКОВЫМ ВАЛОМ ДЛЯ ПРОМЫШЛЕННОГО ПРИМЕНЕНИЯ
- Разрешение до 5.000 импульсов за оборот
- Внешний диаметр 36,5 mm
- Вал полый тупиковый 6 мм
- Уровень защиты IP64 по DIN EN 60529
- Система антиротации с гибким фланцем или стержнем
- Присоединение кабельное (доступна любая длина кабеля) или дистанционный промышленный соединитель
- Разъем включены
If you need 3D step-file of your reference contact us and you will receive it within one working day.
| MECHANICAL SPECIFICATIONS | |
|---|---|
| Materials | Cover: Aluminium Housing: Aluminium Shaft: Brass |
| Bearings | Ballraces |
| Bearings lifetime | 1×1010 rev. |
| Housing fixing | Anti-rotation pin or flexible flange (included) |
| Permitted misalignment | ±0.3 mm axial, ±0.1 mm radial (90.0108205) ±0.3 mm axial, ±0.2 mm radial (90.1037) ±0.2 mm axial, ±0.1 mm radial (90.1111) |
| Shaft fixing | Setscrew |
| Blind hollow shaft diameter | 6 mm. |
| Maximum number of revolutions permitted mechanically | 6000 rpm |
| Protection against dust and splashes according to DIN EN 60529 | IP64 |
| Rotor inertia moment | 10 gcm2 |
| Starting torque at 20ºC (68ºF) | ≤ 0,01 Nm |
| Maximum load permitted on axial shaft | 20 N |
| Maximum load permitted on radial shaft | 40 N |
| Weight aprox. | 0,1 Kg |
| Operating temperature range | -20°C to +80°C — Standard -40°C to +80°C — Special Customer PT00 |
| Vibration according to DIN EN 60068-2-6 | 100 m/s2 (10Hz…2000Hz) |
| Shock according to DIN EN 60068-2-27 | 1000 m/s2 (6ms) |
| Maximum pulses per turn | 10.000 |
| Axial or radial connection | 2 meters cable or industrial connector M12 (other cable lenghts available on order) Female connector not included |
| OUTPUT SIGNALS | ||||
|---|---|---|---|---|
| OUTPUT CIRCUIT | NPN Open Collector | Push-Pull Differential |
RS422 (TTL compatible) | |
| Power supply | 11…30 VDC | 11…30 VDC | 5 VDC ±5% | |
| Output voltage | 11…30 VDC | 5 VDC | 5 VDC | |
| Consumption | 40 mA | Tipical: 45 mA Max: 150 mA |
Tipical: 70 mA Max: 150 mA |
|
| Max. load capability / channel | 40 mA | ±30 mA | ±20 mA | |
| Lenght of cable allowed | 50 m (24 VDC) | 100 m | 1200 m | |
| “Low” signal level | VOL < 0.4 VDC (24 VDC) | VOL < 2.5 VDC | VOL < 0.5 VDC | |
| “High” signal level | VOH > 22 VDC (24 VDC) | VOH > VCC – 3 VDC | VOH > 2.5 VDC | |
| Frequency | 100 kHz | 200 kHz | 300 kHz | |
| Short circuit protection | Not permanent | Yes | Yes | |
| Protection polarity inversion | Yes | Yes | No | |
| Channel A leads (90° electric) channel B, view from the shaft, shaft rotating clockwise | ||||
