МАГНИТНЫЙ ДАТЧИК ЛИНЕЙНОГО ИЗМЕРЕНИЯ
- Детектирование магнитное безконтактное
- Простой монтаж
- Разрешение 10 μm.
- Точность ± 8 μm
- Шаг полярный 2+2
- Защита IP67
- Корпус металлический
- Сигнал интегрированный или внешней ссылки
- Присоединение кабельное (доступна любая длина кабля)
If you need 3D step-file of your reference contact us and you will receive it within one working day.
| MECHANICAL SPECIFICATIONS | |
|---|---|
| Materials | Cover: Aluminium Housing: Aluminium Shaft: Stainless Steel |
| Bearings | Ballraces |
| Bearings lifetime | 1×1010 rev. |
| Maximum number of revolutions permitted mechanically | 6000 rpm |
| Protection against dust and splashes according to DIN EN 60529 | IP65 — Standard IP67 — Option 10A |
| Rotor inertia moment | 30 gcm2 |
| Starting torque at 20ºC (68ºF) | ≤ 0,02 Nm — Standard ≤ 0,03 Nm — Option 10A |
| Maximum load permitted on axial shaft | 40 N |
| Maximum load permitted on radial shaft | 80 N |
| Weight aprox. | 0,5 Kg |
| Operating temperature range | -20ºC to +80ºC — Standard -40ºC to +80ºC — Special Customer AT00 |
| Vibration according to DIN EN 60068-2-6 | 100 m/s2 (10Hz…2000Hz) |
| Shock accoording to DIN EN 60068-2-27 | 1000 m/s2 (6ms) |
| Maximum pulses per turn | 50.000 |
| Axial or radial connection | 2 meters cable or industrial connector (different models available, other cable lenghts available on order) Female connector not included |
| BAND SPECIFICATIONS | |
|---|---|
| Pole pitch | 2+2 mm |
| Accuracy at 20°C | ±30 μm/meter |
| Width band | 10 mm |
| Thickness band “S” (see previous table) | 1,3 mm |
| Maximum length | 60 m |
| Thermal expansion | 10,5 x 10¯⁶ °C¯¹ Tref: 20°C ± 0,1°C |
| Bending radius | 80 mm MIN |
| Operating temperature range | 0°C to +70°C |
| Storage temperature range | -20°C to +80°C |
IMPORTANT: In order not to compromise the accuracy of the system, the magnetic band must be longer than the machine run of at least 4 cm from each side.
