SERIE E36 HS BiSS

MINIATURE BLIND HOLLOW SHAFT ABSOLUTE SINGLETURN ENCODER

MECHANICAL SPECIFICATIONS
Materials	Cover: Aluminium Housing: Aluminium Shaft: Stainless Steel
Bearings	Ballraces
Bearings lifetime	1×10¹⁰ rev.
Housing fixing	Flexible flange (included)
Permitted misalignment	±0.3 mm axial, ±0.2 mm radial (90.1037) ±0.2 mm axial, ±0.1 mm radial (90.1111)
Shaft fixing	Setscrew
Blind hollow shaft diameter	6 mm or 8 mm
Maximum number of revolutions permitted mechanically	6000 rpm – Standard 10000 rpm – Upon request 12000 rpm (≤ 12 bits) – Upon request
Protection against dust and splashes according to DIN EN 60529	IP64
Rotor inertia moment	10 gcm²
Starting torque at 20ºC (68ºF)	≤ 0,01 Nm
Maximum load permitted on axial shaft	20 N
Maximum load permitted on radial shaft	40 N
Weight aprox.	0,08 Kg
Operating temperature range	-40°C to +105°C
Vibration according to DIN EN 60068-2-6	100 m/s² (10Hz…2000Hz)
Shock according to DIN EN 60068-2-27	1000 m/s² (6ms)
Axial or radial connection	2 meters cable (other cable lenghts available on order)

ELECTRICAL SPECIFICATIONS
Interface	BISS
Electronic output	RS422
Power supply (VCC)	4,75…30 VDC
Consumption	≤ 100 mA
Code	Binary
Protocol	BISS-C
Singleturn resolution	up to 13 bits
Absolute accuracy	±0,35°
Relative accuracy	±1,5 LSB
Max. load capability / channel	±20 mA
“Low” signal level	< 0,8 VDC
“High” signal level	2 … 5,5 VDC
Frequency	50 kHz…10 MHz
Short circuit protection	Yes
Protection polarity inversion	Yes