If you need 3D step-file of your reference contact us and you will receive it within one working day.
MECHANICAL SPECIFICATIONS | |
---|---|
Materials | Housing: Stainless Steel AISI304L (1.4307) Flange: Stainless Steel AISI304L (1.4307) Shaft: Stainless Steel AISI304L (1.4307) |
Bearings | Ballraces |
Bearings lifetime | 1×1010 rev. |
Housing fixing | Flexible flange |
Permited misalignment | ±0.5 mm axial, ±0.3 mm radial |
Shaft fixing | Clamp (anodized aluminium 20 μm) |
Blind hollow shaft diameter | 6 mm (other shaft diameter available, upon request) |
Maximum number of revolutions permitted mechanically | 6000 rpm |
Protection against dust and splashes according to DIN EN 60529 | IP67 |
Rotor inertia moment | 30 gcm2 |
Starting torque at 20ºC (68ºF) | ≤ 0,02 Nm |
Maximum load permitted on axial shaft | 40 N |
Maximum load permitted on radial shaft | 60 N |
Weight aprox. | 0,5 Kg |
Operating temperature range | -20°C to +85°C |
Vibration according to DIN EN 60068-2-6 | 100 m/s2 (10Hz…2000Hz) |
Shock according to DIN EN 60068-2-27 | 1000 m/s2 (6ms) |
Resistant to salt mist (NSS) | according to ISO 9227:2006-10 (274 h) |
Radial connection | 2 meters cable (other cable lenghts available or connector mounted at the end of the cable, upon request) |
OUTPUT SIGNALS | ||||
---|---|---|---|---|
OUTPUT CIRCUIT | Push-Pull Differential |
|||
Power supply | 5…30 VDC | |||
Output voltage | 5…30 VDC | |||
Consumption | Tipical: 30 mA Max: 85 mA |
|||
Max. load capability / channel | ±70 mA | |||
“Low” signal level | VOL < 0.5 VDC | |||
“High” signal level | VOH > 2.5 VDC | |||
Frequency | ≤ 300 kHz | |||
Short circuit protection | Yes | |||
Protection polarity inversion | Yes | |||
Channel A leads (90° electric) channel B, view from the shaft, shaft rotating clockwise |