THREAD SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
- Resolution up to 10.000 pulses per turn
- External diameter 58 mm
- Eje roscado M8
- Protection class IP64 according to DIN EN 60529
- Anti-rotation system through flexible flange or antiturn stick
- Connection by cable (other cable lenght available) or industrial connector M16
If you need 3D step-file of your reference contact us and you will receive it within one working day.
| MECHANICAL SPECIFICATIONS | ||||
|---|---|---|---|---|
| Materials | – Cover: Aluminium – Housing: Aluminium – Shaft: Stainless Steel |
|||
| Bearings | Ballraces | |||
| Bearings lifetime | 1×1010 rev. | |||
| Housing fixing | Flexible flange 90.1027 (assembled) Flexible flange 90.1045 (assembled) Anti-turn stick 90.1041 (self-assembly kit included) |
|||
| Permitted misalignment | ±0.5 mm axial, ±0.3 mm radial (90.1027, 90.1045, 90.1041) | |||
| Maximum number of revolutions permitted mechanically | 6000 rpm | |||
| Protection against dust and splashes according to DIN EN 60529 | IP64 | |||
| Rotor inertia moment | 30 gcm2 | |||
| Starting torque at 20ºC (68ºF) | ≤ 0,02 Nm | |||
| Maximum load permitted on axial shaft | 40 N | |||
| Maximum load permitted on radial shaft | 60 N | |||
| Weight aprox. | 0,5 Kg | |||
| Operating temperature range | -20°C to +80°C – Standard -40°C to +80°C – Special Customer UT00 |
|||
| Vibration according to DIN EN 60068-2-6 | 100 m/s2 (10Hz…2000Hz) | |||
| Shock according to DIN EN 60068-2-27 | 1000 m/s2 (6ms) | |||
| Maximum pulses per turn | 10.000 | |||
| Radial connection | 2 meters cable or industrial connector M16 (other cable lenghts available on order) Female connector not included |
|||
| OUTPUT SIGNALS | ||||
|---|---|---|---|---|
| OUTPUT CIRCUIT | NPN Open Collector | Push-Pull Diff erenti al |
RS422 (TTL compati ble) |
RS422 (TTL compati ble) |
| Power supply | 11…30 VDC | 11…30 VDC | 5 VDC ±10% | 11…30 VDC |
| Output voltage | 11…30 VDC | 11…30 VDC | 5 VDC | 5 VDC |
| Consumption | 40 mA | Tipical: 45 mA Max: 150 mA |
Tipical: 70 mA Max: 150 mA |
Tipical: 80 mA Max: 160 mA |
| Max. load capability / channel | 40 mA | ±30 mA | ±20 mA | ±20 mA |
| Lenght of cable allowed | 50 m (24 VDC) | 100 m | 1200 m | 1200 m |
| “Low” signal level | VOL < 0.4 VDC (24 VDC) | VOL < 2.5 VDC | VOL < 0,5 VDC | VOL < 0,5 VDC |
| “High” signal level | VOH > 22 VDC (24 VDC) | VOH > Vcc – 3 VDC | VOH > 2.5 VDC | VOH > 2.5 VDC |
| Frequency | 100 kHz | 200 kHz | 300 kHz | 300 kHz |
| Short circuit protection | Not permanent | Yes | Yes | Yes |
| Protection polarity inversion | Yes | Yes | Not permanent | Yes |
| Channel B leads (90° electric) channel A, view from the shaft, shaft rotating clockwise | ||||
