INCREMENTAL SOLID SHAFT ENCODER COST OPTIMIZED FOR INDUSTRIAL APPLICATIONS
- Resolution available up to less than 1000 pulses per turn
- External diameter 58 mm
- Shaft Ø 6 mm
- Protection class IP54 according to DIN EN 60529
- Different flanges available
- Connection by cable (other cable lenght available) or industrial connector
If you need 3D step-file of your reference contact us and you will receive it within one working day.
| MECHANICAL SPECIFICATIONS | |
|---|---|
| Materials | Cover: Plastic Housing: Aluminium Shaft: Stainless Steel |
| Bearings | Ballraces |
| Bearings lifetime | 1×1010 rev. |
| Maximum number of revolutions permitted mechanically | 6000 rpm |
| Protection against dust and splashes according to DIN EN 60529 | IP54 |
| Rotor inertia moment | 10 gcm2 |
| Starting torque at 20ºC (68ºF) | ≤ 0,005 Nm |
| Maximum load permitted on axial shaft | 20 N |
| Maximum load permitted on radial shaft | 30 N |
| Weight aprox. | 0,3 Kg |
| Operating temperature range | -20ºC to +60ºC. |
| Vibration | 100 m/s2 (10Hz…2000Hz) |
| Shock | 1000 m/s2 (6ms) |
| Maximum pulses per turn | 987 |
| Axial connection | 2 meters cable or industrial connector (other cable lenghts available on order) Female connector not included |
| OUTPUT SIGNALS | ||||
|---|---|---|---|---|
| OUTPUT CIRCUIT | NPN Open Collector | Push-Pull | Line Driver (TTL compatible) |
|
| Power supply | 11…30 VDC | 11…30 VDC | 5 VDC ±10% | |
| Output voltage | 11…30 VDC | 11…30 VDC | 5 VDC | |
| Consumption | 40 mA | Tipical: 45 mA Max: 150 mA |
Tipical: 120 mA Max: 150 mA |
|
| Max. load capability / channel | 40 mA | ±30 mA | ±40 mA | |
| Lenght of cable allowed | 50 m (24 VDC) | 50 m | 100 m | |
| “Low” signal level | VOL < 0.4 VDC (24 VDC) | VOL < 2.5 VDC | VOL < 0.2 VDC | |
| “High” signal level | VOH > 22 VDC (24 VDC) | VOH > VCC – 3 VDC | VOH > 2.4 VDC | |
| Frequency | 100 kHz | 200 kHz | 100 kHz | |
| Short circuit protection | Not permanent | Yes | Yes | |
| Protection polarity inversion | Yes | Yes | No | |
| Channel B leads (90° electric) channel A, view from the shaft, shaft rotating clockwise | ||||
