SERIE CMP30 PARALEL

PROGRAMMABLE ABSOLUT ENCODER FOR HEAVY DUTY INDUSTRIAL APPLICATIONS

• Programming by PC up to 24 bits
• Protection class IP65 according to DIN 40050
• External diameter 90 mm
• Solid shaft

Product no longer available. Please contact us for more information

MECHANICAL SPECIFICATIONS

	Diameter 90mm
Housing	Aluminium/Stainless steel
Shaft	Stainless steel
Bearings	Ballraces
Bearings lifetime	1×10¹⁰rev
Maximum number of revolutions permitted mechanically	6000 rpm
Protection against dust and splashes according to DIN 40050	IP65 / IP67
Rotor inertia moment	270 gcm2
Starting torque at 20ºC (68ºF)	Max. 5,0 Ncm
Maximum load permitted on axial shaft	80 N
Maximum load permitted on radial shaft	100 N
Misalignment permitted axial (blind hollow shaft)	—
Misalignment permitted radial (blind hollow shaft)	—
Weight aprox	1,2 kg ST, 1,3 kg MT
Operating temperature range	-10ºC to +70ºC
Vibration	100 m/s2 (10Hz…2000Hz)
Shock	1000 m/s2 (6ms)
Consumption max	100 mA (CS/HS), 150 mA (CM/HM)
Power supply	10..30Vdc
Interface	Parallel
Electrical output	Push-pull, NPN, NPN Open Collector
Configurable parameters (programmable series)	Direction, code, store, enable, reset, preset1, preset2
Configurable parameters	Direction and reset
Inputs	Opto-coupled
Available codes	Binary, gray and BCD
Max. points per turn	8192 positions (13 bits)
Max. turns	4096 turns (12 bits)
Linearity	±1/2 LSB
Radial and axial connection	2 metres cable or industrial connector