INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
- Resolution up to 1.024 pulses per turn
- External diameter 58 mm
- Solid shaft Ø 10 expandable / Conic shaft 1:10
- Protection class IP66 according to DIN EN 60529
- Anti-rotation system through flexible flange
- Connection by cable (other cable length available)
| MECHANICAL SPECIFICATIONS | ||||
|---|---|---|---|---|
| Materials | Housing: Aluminium Flange: Aluminium Shaft: Stainless Steel |
|||
| Bearings | Ballraces | |||
| Bearings lifetime | 1×1010 rev. | |||
| Housing fixing | Flexible flange 90.1129 (assembled) Flexible flange 90.1124 (assembled) |
|||
| Permitted misalignment | ±0.4 mm axial, ±0.2 mm radial (90.1129) ±0.5 mm axial, ±0.1 mm radial (90.1124) |
|||
| Maximum number of revolutions permitted mechanically | 6000 rpm | |||
| Protection against dust and splashes according to DIN EN 60529 | IP66 | |||
| Rotor inertia moment | 40 gcm2 (shaft 1) 30 gcm2 (shaft 2) |
|||
| Starting torque at 20ºC (68ºF) | ≤ 0,02 Nm | |||
| Maximum load permitted on axial shaft | 30 N | |||
| Maximum load permitted on radial shaft | 40 N | |||
| Weight aprox. | 0,25 Kg | |||
| Operating temperature range | -20°C to +80°C | |||
| Vibration according to DIN EN 60068-2-6 | 100 m/s2 (10Hz…2000Hz) (6ms) | |||
| Shock according to DIN EN 60068-2-27 | 1000 m/s2 (6ms) | |||
| Maximum pulses per turn | 1024 | |||
| Radial connection | 2 meters cable (other cable lengths available on order) | |||
| OUTPUT SIGNALS | ||||
|---|---|---|---|---|
| OUTPUT CIRCUIT | RS422 (TTL compatible) | Push-Pull Differential | ||
| Power supply | 11…30 VDC | 5…30 VDC | ||
| Output voltage | 5 VDC | 5…30 VDC | ||
| Consumption | Tipical: 80 mA Max: 160 mA |
Tipical: 70 mA Max: 150 mA |
||
| Max. load capability / channel | ±20 mA | ±30 mA | ||
| Lenght of cable allowed | 1200 m | 100 m | ||
| “Low” signal level | VOL < 0.5 VDC | VOL < 2.5 VDC | ||
| “High” signal level | VOH > 2.5 VDC | VOH > VCC – 3 VDC | ||
| Frequency | 300 kHz | 300 kHz | ||
| Short circuit protection | Yes | Yes | ||
| Protection polarity inversion | Yes | Yes | ||
| Channel B leads (90° electric) channel A, view from the shaft, shaft rotating clockwise | ||||
