MINIATURE BLIND HOLLOW SHAFT ABSOLUTE SINGLETURN ENCODER
- Analog output
- Resolution up to 12 bits
- External diameter 24 mm
- Blind hollow shaft Ø 6 mm
- Protection class IP64 according to DIN EN 60529
- Anti-rotation system through flexible flange
- Connection by cable (other cable length available)
| MECHANICAL SPECIFICATIONS | |
|---|---|
| Materials | Cover: Aluminium Housing: Aluminium Shaft: Brass |
| Bearings | Ballraces |
| Bearings lifetime | 1×1010 rev. |
| Housing fixing | Flexible flange (included) |
| Permitted misalignment | ± 0.1 mm axial, ±0.1 mm radial |
| Shaft fixing | Clamp |
| Blind hollow shaft diameter | 6 mm |
| Maximum number of revolutions permitted mechanically | 6000 rpm |
| Protection against dust and splashes according to DIN EN 60529 | IP64 |
| Rotor inertia moment | 2 gcm2 |
| Starting torque at 20ºC (68ºF) | ≤ 0,01 Nm |
| Maximum load permitted on axial shaft | 10 N |
| Maximum load permitted on radial shaft | 10 N |
| Weight aprox. | 0,06 Kg |
| Operating temperature range | -40°C to +85°C |
| Vibration according to DIN EN 60068-2-6 | 100 m/s2 (10Hz…2000Hz) |
| Shock according to DIN EN 60068-2-27 | 1000 m/s2 (6ms) |
| Axial or radial connection | 2 meters cable (other cable lengths available or connector mounted at the end of the cable, upon request) |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| Interface | Analog |
| Electronic output | 0..20mA , 4..20mA, 0..5V, 0..10V |
| Power supply (VCC) | 12-18V, 20-28V, 15-30V |
| Consumption | ≤ 30 mA |
| Resolution | Up to 12 bits |
| Range | 180° and 360° electrical (*) |
| Short circuit protection | Yes |
| Protection polarity inversion | Yes |
(*) Measuring range can be factory configured from 18° to 360°.
