BLIND HOLLOW SHAFT MAGNETIC INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
- Resolution up to 512 pulses per turn
- External diameter 36,5 mm
- Blind hollow shaft Ø 10 or 12 mm
- Protection IP65 according to DIN EN 60529
- Anti-rotation system through pin torque support
- Connection by cable (other cable lenght available)
If you need 3D step-file of your reference contact us and you will receive it within one working day.
| MECHANICAL SPECIFICATIONS | |
|---|---|
| Materials | Cover: Aluminium Housing: Aluminium Shaft: Brass |
| Bearings | Ballraces |
| Bearings lifetime | 1×1010 rev. |
| Housing fixing | Anti-rotation pin (included) |
| Blind hollow shaft diameter | 10 or 12 mm |
| Maximum number of revolutions permitted mechanically | 6000 rpm |
| Protection against dust and splashes according to DIN EN 60529 | IP65 |
| Rotor inertia moment | 20 gcm2 |
| Starting torque at 20ºC (68ºF) | ≤ 2 Ncm |
| Maximum load permitted on axial shaft | 40 N |
| Maximum load permitted on radial shaft | 60 N |
| Weight aprox. | 0,1 Kg |
| Operating temperature range | -20°C to +85°C |
| Vibration according to DIN EN 60068-2-6 | 100 m/s2 (10Hz…2000Hz) |
| Shock according to DIN EN 60068-2-27 | 1000 m/s2 (6ms) |
| Number of pulses per turn | 32, 64, 128, 256, 512 |
| Axial or radial connection | 2 meters cable (other cable lenghts available or connector mounted at the end of the cable, upon request) |
| OUTPUT SIGNALS | ||||
|---|---|---|---|---|
| OUTPUT CIRCUIT | Push-Pull Differential |
RS422 (TTL compatible) | ||
| Power supply | 11…30 VDC | 5 VDC ±5% | ||
| Output voltage | 11…30 VDC | 5 VDC | ||
| Consumption | Tipical: 45 mA Max: 150 mA |
Tipical: 70 mA Max: 150 mA |
||
| Max. load capability / channel | ±30 mA | ±20 mA | ||
| Lenght of cable allowed | 100 m | 1200 m | ||
| “Low” signal level | VOL < 2.5 VDC | VOL < 0.5 VDC | ||
| “High” signal level | VOH > VCC – 3 VDC | VOH > 2.5 VDC | ||
| Frequency | 200 kHz | 300 kHz | ||
| Short circuit protection | Yes | Yes | ||
| Protection polarity inversion | Yes | No | ||
| Channel A leads (90° electric) channel B, view from the shaft, shaft rotating clockwise | ||||
